What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 15:06
A fuse is a non-resetable over current circuit protector.
These devices are installed between the “hot” and “neutral” and protective ground.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What is lightning?
A circuit breaker is similar, but is resettable.
Has anyone ever made you take off your shirt?
I post the exact comment here.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Here is a simplified AC power diagram.
What is the reason for the high rate of unmarried individuals in America, particularly among males?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A Year Out From the World Cup, the USMNT Looks Unprepared to Defend Home Turf - The Ringer
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but this device (an Inductor) … impedes the rapid changes in the current.
This is where the MOV conducts again, and dissipated the energy.
Practice Report (6/9): Notes from the sideline - New York Giants
Upvotes:
so, what happens?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Wright State stuns No. 1 Vanderbilt with historic upset in baseball regionals - Yahoo Sports
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Two space vets added to Astronaut Hall of Fame as one awaits launch - collectSPACE.com
It seems Mohan does not understand the difference between a comment and an Answer.
It also is a device that limits the change in current flow.
2024–10–16 [ OO OLAOYE OYEBODE ]
what exactly is a ‘surge’ protector?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The other is “what does a “fuse” do?”
nine
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Meta pauses mobile port tracking tech on Android after researchers cry foul - theregister.com
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
First Sentence:
Science-Backed Tips for Increasing Your Stamina at Any Age - Prevention
At one ohm, the resistor has a maximum of 1 watt power.
Now when you have a certain ac resistance, then a current flows in a loop.
For this case there are devices called Metal oxide varistors (MOV).
Are there really people who still believe the Earth is flat?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
a photo is worth a thousand words.
eight
A Giant Mouth Has Opened on The Sun And Even It Looks Surprised - ScienceAlert
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
One
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This device then solves the entire problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
[image of Common-mode choke]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
There are two important concepts here.
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
But it can get overloaded, and no longer works.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes Rainy Season and Lightning.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[old diagram got deleted by accident]
So, the voltage could go up to 500 volts, and the fuse will not open up.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but I think this circuit , shows a few more pieces.
Because the load is inductive, the current lags the voltage.(by a bit).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
There are three different concepts here that are getting confused.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
the problem then depends on "how fast does the fuse operate?".
(Dc diagram shown, AC is similar).
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes the function of a fuse.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These are simplified answers to the original question, and does not change anything I wrote above.
At least they know the answer if they wanted it.
This one hit behind the barn.
This is 'the assistant's answer'